Aim7 PepperBox Plan- B Muzzle Brake & Bravo Adapter 1/2×28

Aim7 PepperBox Plan-B Muzzle Brake 1/2×28 & Bravo HUB Adapter Combo Kit

Upgrade your host platform with the Aim7 PepperBox Plan-B Muzzle Brake & Bravo HUB Adapter Combo. Engineered for rapid-taper mounting, repeatable point-of-impact (POI), and heavy-duty gas dispersion, this complete pairing delivers seamless compatibility between your 1/2×28 host firearm and industry-standard 1.375×24 Bravo / HUB modular hardware.

By coupling the 360-degree radial porting of the 4140 steel PepperBox brake with the high-strength stainless steel Plan-B Bravo adapter, this kit provides smooth recoil mitigation, protects external threads from carbon fouling, and serves as an effective sacrificial blast baffle for high-pressure setups.

Key Combo Features

• 360-Degree Radial Gas Dispersion: The “pepper pot” port matrix vents high-pressure gases symmetrically in all directions to flatten recoil impulse and minimize muzzle rise.
• Concentric Plan-B Taper Lock: Precision-machined forward taper aligns on a taper-on-taper interface for dead-repeatable POI lockup while sealing gas tight to prevent carbon accumulation on threads.
• Bravo / 1.375×24 Universal Interface: Adapter body threads into any standard 1.375×24 Bravo/HUB socket, mating instantly with Plan-B / Cherry Bomb pattern muzzle devices.
• Sacrificial Baffle Protection: The heavy-duty 4140 steel brake acts as an internal sacrificial shield, absorbing harsh unburnt powder jet erosion before it contacts blast chambers.
• Short-Barrel Tested: Rigorously tested and fully rated for short barrels down to 7.5″ with .223 / 5.56 and 9mm ammunition.

Technical Specifications

Component Overview

1. Aim7 PepperBox Plan-B Muzzle Brake: Solid 4140 alloy steel radial brake engineered with multi-port radial venting, integrated base wrench flats for easy armorer torquing, and precision .900×24 external taper threading.
   Specs: 1.89″ OAL | 1/2×28 TPI | 2.4 oz | Nitride treated.
2. AIM7 Plan-B to Bravo Hub Adapter: Heavy-duty stainless steel conversion adapter converting standard 1.375×24 Bravo-pattern tubes to the Plan-B / Cherry Bomb taper interface without adding excess dead weight or bulk.
   Specs: 1.375×24 Bravo external threads | .900×24 Plan-B internal taper | Approx. 0.2″ added length.

Trademark Disclaimer: “Plan B” and “Cherry Bomb” are registered trademarks of Q, LLC. “SilencerCo”, “Dead Air”, “YHM”, “Rugged”, and “CGS” are trademarks of their respective owners. The AIM7 PepperBox Brake & Bravo Adapter are aftermarket components manufactured independently by AIM7 and are intended strictly for cross-compatibility with industry-standard mounting interfaces. AIM7 is not affiliated with or endorsed by Q, LLC or other named brands.

Fitment, Safety & Legal Disclosures

• Classification Notice: THIS ITEM IS NOT A SILENCER, SUPPRESSOR, OR NFA COMPONENT. It is strictly an open, unbaffled muzzle brake and mounting adapter intended exclusively for recoil reduction and quick-detach modular mounting. It contains no internal baffles, packing media, or acoustic baffling, and does not alter, reduce, or diminish the report of a firearm.
• Safety & Alignment: Verify bore alignment and concentricity using a quality armorer’s alignment rod before firing. Installation by an experienced armorer or certified gunsmith is strongly recommended. Always confirm firearm is completely unloaded and pointed in a safe direction before mounting.
• Legal & Export Compliance: Buyer assumes full responsibility for compliance with all federal, state, and local laws. Strictly subject to U.S. export regulations (ITAR/EAR)—U.S. sales only, no export.
• Proposition 65 Warning: This product may contain trace chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.